Siding replacement isn’t a project most homeowners do twice. That’s exactly why the mistakes below show up so often. Few people have replaced siding before, so nobody knows which questions to ask until something goes wrong. Five Star Service has been re-siding homes across Cary, Apex, Raleigh, Durham, and Chapel Hill for more than 25 years, and the same seven mistakes account for most of the regret calls. Here’s what to watch for before you sign a contract.
1. Choosing a Material Based on Price or Curb Appeal Alone
A siding sample looks great in a showroom. It looks different after three Triangle summers of 90-degree humidity and a few thunderstorms with sideways rain.
Vinyl costs less up front and holds up fine for plenty of homes. But it also softens in extreme heat, and cheaper panels can warp along a hot, south or west-facing wall. Fiber cement costs more to install, but it doesn’t expand and contract with humidity the way vinyl does, and it resists the moisture problems that hot, humid climates create for wood-based products.
This is where a lot of Triangle homeowners land on James Hardie fiber cement, it’s the material Five Star Service is a Preferred Contractor for, and it’s built specifically to handle the kind of climate swings this region gets. That’s not the right call for every budget or every home, though. If you’re still weighing vinyl against fiber cement, our full comparison breaks down cost, maintenance, and resale value side by side.
2. Hiring the Lowest Bidder Without Checking Credentials
Three quotes come in. One is thousands less than the others. It’s tempting.
Here’s the problem: siding contractors who bid low often make it up by skipping insurance, using uncertified crews, or cutting corners on the parts you can’t see once the siding goes up. Before you sign anything, confirm the contractor carries liability and workers’ comp insurance, and ask whether their installers are certified by the manufacturer whose product they’re recommending. A James Hardie Preferred or Elite Preferred Contractor designation means the installer has been trained on Haredie’s specific fastening and clearance requirements, not just “siding installation” in general.
One more thing worth knowing: in North Carolina, any project over $40,000 legally requires a licensed general contractor, not just a subcontractor or handyman crew. A full siding replacement on a mid-size Triangle home can land above that threshold, so it’s a fair question to ask directly: “Are you a licensed North Carolina general contractor?”
If you’re wanting to consider financing your siding project we have various options to consider.
3. Skipping the Inspection Underneath the Old Siding
New siding over a rotted wall is just a nicer-looking problem.
Before installation, a good contractor pulls a section of the old siding and checks the sheathing, the water-resistive barrier (the house wrap that manages moisture behind your siding), and the flashing around windows and doors. In a climate as humid as the Triangle’s, moisture that’s been trapped behind old or damaged siding for years is common, especially on homes with older builder-grade house wrap or missing kick-out flashing at roof lines. If your installer’s plan doesn’t include a substrate check before the first board goes up, ask why not.
4. Letting a Vinyl Crew Install Fiber Cement
Vinyl and fiber cement are installed differently, and the differences matter more than they sound.
Vinyl panels are designed to float, they’re hung loosely so they can expand and contract with temperature. Fiber cement is fastened tight and needs specific nail placement, gapping, and caulking at joints. A crew that installs both the same way will often nail fiber cement too tight or skip the manufacturer’s clearance requirements at trim and corners. The result shows up later as cracking, buckling, or water intrusion at the seams, and it can void the product warranty, since James Hardie’s warranty terms are tied to installation following their published guidelines.
If a contractor is installing James Hardie siding, ask specifically whether their crew has been trained and certified on James Hardie’s installation standards, not just general siding experience.
5. Not Confirming the Product Is Matched to Your Climate
James Hardie doesn’t make one version of its siding. Through what it calls the Hardie Zone System, the company engineers different product lines for different regions, one formulated for freeze-thaw climates, another for hot, humid, storm-prone regions like the Southeast. The warranty only applies if the correct product line was installed for your zone.
Most homeowners never think to ask which one they’re getting. A Hardie-certified contractor should be able to tell you, without hesitation, which product line is specified for your project and why. If they can’t answer that question, that’s worth noting.
6. Picking a Color Before Looking at the Whole House
A paint chip on your kitchen counter and a color on your entire home read completely differently.
Your roof, brick, trim, and even your driveway already set a palette. A siding color chosen in isolation can clash with all of it once it’s installed. James Hardie’s ColorPlus finishes are baked on in a factory-controlled process rather than field-painted, which means the color stays consistent board to board, but that only helps if you picked the right color to begin with. Hold a full-size sample against your home in daylight, not just under showroom lighting, and check it against your roof and trim. For more on pairing colors specifically for Triangle-area homes, see our guide to roofing and siding color combinations.
7. Signing the Contract Before Asking About Permits and Warranty Terms
Two questions homeowners consistently skip, and both matter.
Permits. Under North Carolina’s building code (G.S. 160D-1110), a straightforward siding replacement that doesn’t involve structural changes generally does not require a building permit. But “generally” is doing some work in that sentence, if your project includes repairing load-bearing sheathing or changing the wall assembly, permitting rules can apply. Ask your contractor directly how your specific project is being handled, rather than assuming either way.
Warranty terms. James Hardie backs its siding with a 30-year, non-prorated, transferable product warranty, plus a separate 15-year warranty on ColorPlus factory finishes covering peeling, cracking, and chipping. Both depend on proper installation and on not painting over the factory finish yourself later. Ask your contractor to walk you through what’s covered, what voids coverage, and whether the warranty transfers if you sell the house.
The 7 Mistakes at a Glance
| Why It Costs You | The Fix | |
|---|---|---|
| Choosing material by price or looks alone | Cheaper materials can warp, fade, or take on moisture damage faster in Triangle humidity | Match the material to the climate, not just the budget or the sample board |
| Hiring the lowest bidder | Uninsured or uncertified crews often cut corners you won’t see until later | Confirm insurance, NC licensing (required over $40,000), and manufacturer certification |
| Skipping the substrate inspection | Rot or moisture trapped behind old siding keeps damaging the wall underneath | Require a substrate and water-resistive barrier check before install |
| Installing fiber cement like vinyl | Wrong fastening and gapping causes cracking and can void the warranty | Use a crew certified specifically on Hardie’s installation standards |
| Skipping the climate-zone check | The wrong product line for your region isn’t covered under warranty | Ask which HardieZone product line is specified for your home and why |
| Choosing color in isolation | A color that looks great on a chip can clash with roof, brick, and trim | Compare full-size samples against your home in daylight |
| Signing before asking about permits and warranty | Unclear coverage terms and permit assumptions cause disputes later | Get permit status and warranty terms in writing before you sign |
Frequently Asked Questions
Avoiding these seven mistakes comes down to one habit: ask questions before you sign, not after the crew shows up. If you’re weighing your options for a home in Cary, Apex, Raleigh, Durham, or Chapel Hill, Five Star Service offers free, no-pressure siding estimates, including a look at whether repair or replacement makes more sense for your home.